LOCTITE®

LOCTITE® EA 3471 Kit

Loctite EA 3471
              Technology Epoxy
Chemical Type Epoxy
Appearance (Resin) Grey
Appearance (Hardener) White
Appearance (Mixed) Grey putty
Components Two part – Resin & Hardener
Mix Ratio, by weight – Resin : Hardener  6.25 : 1
Mix Ratio, by volume – Resin : Hardener  2.5 : 1
Cure Room temperature cure after mixing
Application Temperature 15 to 30°C (59 to 86°F)
Specific Benefit ● Will not sag or shrink ● Rebuilds worn parts fast – limits downtime •High steel content – cures to a metal-like finish Superior adhesion – bonds well to all metal substrates  

LOCTITE®  EA 3471 is a steel reinforced, two-part epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed.Typical applications include repairing non-structural defects in castings, making jigs and fixtures, sealing vessels, tanks and valves, resurfacing worn air seals and filling cavitated areas. This product is typically used in application with an operating range of -30°C to 105°C